Current Linde IC-Trucks H50-H80-EVO

2022 Linde H50 – H80 EVO H60D

2022 Linde H50 – H80 EVO H60D

Swipe to View More

  • Year 2022
  • Make Linde
  • Model H50 – H80 EVO
Shop Linde Pre-Owned
Product Details Specifications Photos
2022 Linde H50 – H80 EVO H60D

2022 Linde H50 – H80 EVO H60D

  • Year 2022
  • Manufacturer Linde
  • Model Name H50 – H80 EVO
  • Trim Name H60D
  • Generic Type (Primary) Electric Man Down Swing Reach Turret

2022 Linde H50 – H80 EVO H60D

Impressive Operating Performance – Minimal Maintenance Breaks

Safe handling and high handling performance – with the H50 – H80 EVO IC trucks, the two go hand in hand. These robust trucks are ideally suited to heavy-duty applications with large loads. The protective driver's roof and frame form a single compact unit to ensure greater safety, while the slim profile of the lift mast improves the driver's vision. Powerful engines, the hydrostatic direct drive, and the Linde Load Control lift mast control system all guarantee high operational performance. Plus, the hydrostatic drive operates without a transmission, clutch, differential or drum brakes – reducing servicing time and further increasing handling capacity.

Features may include:
  • Top operating performance for large loads by means of powerful engines and lift mast control system
  • Improved visibility through slim lift mast profile
  • Minimal service times due to hydrostatic drive – no transmission, clutch, differential or drum brakes
  • Safe and quick load handling due to 30 % reduction in lift mast torsion
  • Shifting roof-mounted steel grid protects driver from falling loads when mast tilted

Operational

Operating Speed Travel W/Without Load: 22 / 23 m/s | Lifting With/Without Load: 0.54 /0.54 m/s | Lowering with/without load: 0.54 /0.5 m/s | Rated: 2200 1/min
Operating Conditions Tractive force, with/without load: 50000/ 35000 N | Acceleration time, with/without load: 5.4 / 4.8 s
Maximum Pressure for attachments: 265 bar
Drive Control hydrostatic / stepless

Wheels & Tires

Tires, Front Specification 355 /65 - 15
Tires, Rear Specification 8.25 - 15
Wheels Number front/rear: 2x / 2

Dimensions

Dimensions Load centre: 600 c (mm) | Axle centre to fork face: 630 x (mm) | Mast/fork carriage tilt, forward/backward: 5.0 / 9.0° | Fork: 80 mm x 130 mm x 1200 mm
Wheelbase 2200 y (mm)
Track Width Front: 1594 b10 (mm) | Rear: 1600 b11 (mm)
Height Mast Lowered: 2735 mm | Mast Extended: 4448 mm | Overhead Guard: 2746 mm | Seat relating to SIP/ stand: 1507 mm | Towing Coupling: 830 mm
Overall Length 4719 mm
Length To Fork Face: 3519 mm
Overall Width 1900/ 1870 mm
Width Of Work Carriage: 1800 mm | Aisle with Pallet 1000 x 1200 across forks: 5016 mm| Aisle with Pallet 800 x 1200 along forks: 5216 mm
Ground Clearance Below Mast: 204 mm| Centre Of Wheelbase: 249 mm
Turning Radius 3186 mm
Displacement 4038 cm3

Capacities

Cargo Capacity 6.0 Q(t) | Rated up to lift height: 4000 mm
Axle Capacity, Front With Load: 14250 kg | Without Load: 4895 kg
Axle Capacity, Rear With Load: 1919 kg | Without Load: 5274 kg

Weights

Weight Service: 10169 kg

Product Photography

Warning WARNING: Operating, servicing and maintaining a passenger vehicle, an off-highway motor vehicle or a recreational marine vessel can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or vessel in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle or vessel. For more information go to https://www.p65warnings.ca.gov/products/passenger-vehicle and https://www.p65warnings.ca.gov/products/marine.